– 76 –
JOB
The scan setting of the job file can be applied to the current prescan image by loading a job file
from the preset Job File List.
LOADING A JOB
Click on the Prescan tab.
1
Click on .
• The Job Selection dialog box will appear.
2
Select the appropriate category from
the list box.
3
Select the job file name to be applied
from the list.
• The scan setting saved in the selected job
file will be displayed in the right of the win-
dow. When another job file is selected, the
setting is changed correspondingly.
• By clicking on the Name or Date option but-
ton, the format of the Job File List can be
changed.
4
Click on [OK].
• The selected scan setting will applied to the
prescan image and the Job Selection dialog
box will disappear. The selected job will be
displayed in the Job Name list box.
5