– 40 –
PRESCAN
The Dimage Scan Multi II uses the center of the image to focus. If the film is warped or curled, or
if [Auto Focus at Scan] is not checkmarked in the Preferences (p. 88), the focus should be
adjusted with the Point AF or the Manual Focus function.
FOCUS
The focus is determined by detecting the contrast in an image. Therefore, the focus
may not be adjusted appropriately in an area wiuth no contrast (such as a white cloud
or a solid black subject).
A specified point in the prescan image can be focused automatically.
POINT AF
To Next Page
Loading...