– 63 –
IMAGE CORRECTION
Variation Amount Control slider
Limit indication checkbox
In the Saturation correction, 2 images in which saturation has been corrected from the center
image by one-step are displayed on the right and left sides of the center image. When the image
in the direction to be corrected is clicked, the image is placed in the center and new variation
images are displayed.
By dragging the Variation Amount Control slider, the value of correction can be changed in the
range from 1 to 20 (The initial value is 10).
When the Limit indication check box is checkmarked and the saturation is corrected, any part of
the image which has been corrected beyond the range which can be displayed is displayed in
reversed colour.
VARIATION CORRECTION – SATURATION CORRECTION
To Next Page
Loading...