Minolta DIMAGE SCAN MULTI II F-3100

– 98 –
NAVIGATION
AUTOMATIC OPERATION USING THE NAVIGATION FUNCTION
Click on the Navigation button.
• The Navigation window will appear.
• When the Navigation window is displayed for
the first time, the navigation set in the default
setting is selected.
1
Select the operation items to be auto-
mated in the Operation Item check-
boxes and the Repeated Operation
Item checkboxes.
• The Index Scan or Frame Selection is avail-
able only when “35 mm” or “APS Cassette” is
selected in the film format.
• The Repeated Operation Item checkboxes
are available only when “35 mm” or “APS
Cassette” is selected in the film format.
• When performing the automatic operation in
the default setting, skip this step.
• When Point AF or Manual Focus, Auto Crop,
Correction Job Selection or Image Correction
are selected, be sure and select the Prescan
Operation Item checkbox at the same time.
2
Click on the Navigation Start button.
• The automatic operation will start.
• If you click on the Navigation Stop button, the
automatic operation stops temporarily. To
resume the operation, click on the Navigation
Start button.
3