– 79 –
FINAL SCAN
With the the DS Multi II Utility software, you can save the final scan in one of the following file
fomats.
Windows
®
Bitmap (BMP)
(Windows only) The BMP graphic file format is for bit-mapped images.
BMP images are supported by the Paint accessory and can easily be opened on most PCs
running Windows.
JPEG
The JPEG (Joint Photographic Experts Group) compression standard is capable of producing a
high compression ratio while maintaining image quality. JPEG is a widely supported image file
format.
TIFF
Tagged Image File Format (TIFF) files contain bit-mapped data. In addition to being a widely
supported format, TIFF is able to handle the colour palette needed for professional-quality
images and graphics.
PICT (Macintosh operating system only)
The PICT graphic file format uses a lossless compression scheme and is compatible with many
Macintosh applications.
• Only TIFF can be selected when using a utility software and selecting 16-bit or 16-bit linear in
the [Colour depth] of the Preferences (p.89).
• PICT can not be selected when the width of the image size is over 4096 pixel.
Select the compression rate when
selecting JPEG as a file type.
• When ‘low’ is selcted, the file size is large.
However, the deterioration of image is
reduced comparedwith selecting [Medium] or
[High compression].
• When ‘High’ is selected, the file size is small-
er. Howver, there is more degradation to
image qulaity, compared to using medium or
low.
4
Click on [Save] (or [OK]).
• The final scan will begin.
• When the final scan is complete, the final
scan image is saved in the selected location,
with the file name you input, and in the
specifed file type.
• After the image is saved, the display returns
to the Prescan window.
5
To Next Page
Loading...