Mircom 9500 Series User Manual

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 36
Press # to access the feature. The display should appear...
-Program Options-
Multi or Single
M=00 S=11 _ _
Please enter choice:
Enter 00 for multiple entrances or 11 for single entrance. The next display should appear...
-Program Options-
* = Abort, # = Store
M=00 S=11 x x
Please enter choice:
Press # to store or * to abort entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
RING CYCLE SELECT (9501A only)
To change the number of Ring Cycles (factory default is 6 cycles), scroll through until you reach the feature as
shown below.
[1=Bck] [3=Fwd]
Do you want to edit
the Ring cycles ?
[*=Abort] [#=Yes]
Press # to access the feature. The display should appear...
-Program Options-
# RING Cycles
00 To 99 Cycl. _ _ <----99 cycles max.
Please enter choice:
Enter the number of ring cycles. The next display should appear...
-Program Options-
* = Abort, # = Store
00 To 99 Cycl. x x
Please enter choice:
Press * to abort or # store entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
SET CLOCK (NOT AVAILABLE - DO NOT USE)
To set the clock, scroll through until you reach the feature as shown below.

Mircom 9500 Series Specifications

General

Brand	Mircom
Model	9500 Series
Category	Intercom System
Language	English