Mircom 9500 Series User Manual

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 38
Press # to access the feature. The display should appear...
-Program Options-
(2) Code: _ _ _ _
_ - _ _ _ - _ _ _ - _ _ _ _ <----up to 11 digits telephone number
Please enter choice:
Enter Dial Code and telephone number. If less than 11 digits are required, simply press # to blank the remaining
digit(s). When you make a mistake and wish to re-enter the code, press * to enter code again. After entering the
telephone number, the display should appear...
-Program Options-
* = Abort, # = Store
x - x x x - x x x - x x x x
Please enter choice:
Press * to abort or # to store entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
RING PATTERN SELECT (9501A only)
The system allows the user to adjust the ringing pattern as required. Factory default is set to a distinct ringing
pattern. Normal or Standard North American ringing pattern can be selected for applications where ringing pattern
is critical; especially for older answering machines that only accept normal ringing pattern.
To change the ringing pattern, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to edit
ringing-pattern ?
[*=Abort] [#=Yes]
Press # to access the feature. The display should appear...
-Program Options-
Distinct/Normal
D=15 N=38 _ _ <---- 38 for North American ringing pattern
Please enter choice:
Enter 15 for Mircom's distinct ringing pattern or 38 for Normal or Standard North American ringing pattern. Enter
any number for other desired ringing pattern. After entering the selection, the display should appear...
-Program Options-
* = Abort, # = Store
D=15 N=38 x x
Please enter choice:
Press * to abort or # to store entry. To quit, enter *000 while at PROGRAM MODE menu to return to NORMAL
MODE.
SORT RESIDENTS'/TENANTS’ NAMES
To sort Residents'/Tenants’ names, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to sort
the tenant names ?
[*=Abort] [#=Yes]
Press # to sort Residents'/Tenants’ names. While the system is sorting names, the display should appear...
Sorting tenant List!

Mircom 9500 Series Specifications

General

Brand	Mircom
Model	9500 Series
Category	Intercom System
Language	English