en-US
|
42
|
User Manual
|
MD-500
1699503426 | REV A | 05.2021
© Mitchell International
Special Tests Shortcuts
Overview
Special Tests Shortcuts provide a way for specic systems to
be recalibrated or reset after service. Maintenance test
availability will vary from vehicle to vehicle, and will be
updated over time.
Maintenance tests are the same as special tests, but this is a
shortcut to most frequently used tests on the selected vehicle.
These specic tests can also be found
under special tests.
1. Select Special Tests Shortcuts from the Screen.
2. Select the desired category for the component or system
being worked on.
Note: If there are no sub-sections available for the selected category
go to step 5.
3. Select the desired test to be performed.
4. Follow prompts on the screen.
5. Run the test.
Note: For more information refer to Special Tests section.
Special Tests Shortcuts Button Denitions
Screen Capture
Screen Capture
Selecting Screen Capture will save a copy of the current
open screen.
To Next Page
Loading...
