Mitchell Diagnostics MD-500 - Vehicle System Programming and Information; Key Programming and Battery Disconnect; TPMS Quick Information

en-US
|
38
| User Manual |
MD-500
1699503426 | REV A | 05.2021
© Mitchell International
2. Some of the tune up specications contained in this
section include the following:
• Starter
• Generator
• Regulator
• Spark plug
• Idle speed
• Fuel pressure
• Compression
• Firing order
Key Programming
Displays instructions for the selected vehicle for programming
a key.
1. Select Key Programming from the Diagnostic Information
screen.
2. Follow the prompts on the screen to program a key and
or replace battery in key.
Battery Disconnect
Displays procedures for disconnect the battery on the
selected vehicle.
1. Select Battery Disconnect from the Diagnostic
Information screen.
2. Follow the prompts on the screen to disconnect and
connect the battery.
3. Follow procedures for updating vehicle systems after
battery has been disconnected.
TPMS Quick Info
Describes the operating procedures for the Tire Pressure
Monitor System (TPMS) for the selected vehicle.
1. Select TPMS Quick Info from the Diagnostic Information
screen.
2. Follow the prompts on the screen to reset the tire
pressure monitors.
Diagnostic Information Button Denitions
Select Controller
Change Controller Button
Tapping the Change Controller button displays the select
controller screen.
View User Manual
View User Manual
Select this link to view the online user manual.
Enhanced Vehicle Scan
Overview
The Enhanced Vehicle Scan (EVS) will scan all available