USER GUIDE
Mitel 5634 VoWi-Fi Handset
4
Calling
This chapter describes how to use the call function on your Mitel 5634 handsets and includes the
following sections:
•
4.1 Call list, page 12
•
4.2 Incoming Calls, page 13
•
4.3 Missed Calls, page 13
•
4.4 Outgoing Calls, page 14
•
4.5 During the Call , page 15
•
4.6 Call Diversion, page 18
•
4.7 Push-to-Talk Group Call, page 19
•
4.8 Emergency Calls, page 22
•
4.9 Call Services, page 22
4.1
Call list
Call list stores 25 last received, dialled or missed calls. If the call was, for example, missed more than
once, the total number of occurrences is shown in brackets to the left of the number.
If supported by the system, the number’s contact name can be displayed in the Call list.
The handset can also be configured to not store any calls in the Call list to ensure privacy for
the users sharing the same handset. These features require configuration in the handset via
WinPDM/ WSM3/CPDM3 DM.
Call Using the Call list
1.
Press the Call key or go into the Calls menu → Call list.
2.
Select the number from the list.
3.
Press the Call key or the Call soft key to dial.
Call list Functions
In the opened Call list, press More and select one of the following functions in the pop-up menu:
•
Time of call to see the time and date of the call.
•
Edit number to change the number before making a call.
•
Save number to add the number to the list of contacts. Select Work number, Mobile number, or
Other number.
•
Send message
2
to write a message to the selected number/contact in the Call list.
•
Delete to remove the number/contact from the Call list.
•
Delete all to remove all numbers/contacts from the Call list.
The same functions also exist in the Missed calls list, for the details refer to the 4.3 Missed Calls, page 13.
2.
Applicable to 5634 Alarm and 5634 Services only.
To Next Page
Loading...
