Mitel 5634 - Adjust the Volume; Start a New Call; Switch between Two Ongoing Calls; Transfer the Call to a New Number

USER GUIDE
Mitel 5634 VoWi-Fi Handset
Calling
58016275 / October 2020
16
It is possible to configure ten extra specific in call functions as well as configure the right soft
key as a shortcut to a certain in call function.
4.5.1 Adjust the Volume
Press the Volume up button to increase the volume, and the Volume down button to decrease the
volume. The navigation key up and down can also be used to adjust the volume.
The handset can be configured to set a specific volume for different audio modes: Headset,
Speaker, Loudspeaker and as well as automatically store volume changes in the handset for
future calls. For the details, refer to the
Mitel 5634 VoWi-Fi Handset Configuration Guide .
4.5.2 Start a New Call
The second call can be made while in a call. The first call is automatically put on hold while the new call
is active.
1. During the call, press More.
2. In the pop-up menu, select New call.
3. Enter the number or press the Phonebook in the Soft key bar to select the contact from the list.
4. Press the Call key or the Call soft key to start the second call.
4.5.3 Switch between Two Ongoing Calls
1. Select the on hold call using the navigation keys. The on hold call is indicated by the On hold call
icon
.
2. Press Retr. to switch between the calls. The previously active call is automatically put on hold.
4.5.4 Transfer the Call to a New Number
This option is only visible when the Allow blind transfer parameter is defined on the handset.
For more information, refer to the Mitel 5634 VoWi-Fi Handset Configuration Guide .
1. During the call, press More.
2. In the pop-up menu, select Transf. to new.
3. Enter the number or press the Phonebook in the Soft key bar to select the contact from the list.
4. Press OK or the Call key or the Call soft key to transfer the call. When the new call is
established, the party that initiated the transfer is disconnected.
4.5.5 Transfer the First Call to the Second Call
It is possible to transfer two calls to each other. The following transfer option is available when more
than one call exists.
1. Select the call on hold using the navigation keys.
2. Press More.
3. In the pop-up menu, select Transfer to [name]. The two calls are connected. The Transferred
confirmation appears and the handset enters Idle mode.