USER GUIDE
Mitel 5634 VoWi-Fi Handset
The Play soft key is not available for Enhanced beep and Custom sound. Instead,
send a message to the handset to listen to the sound.
By default, the message volume follows the ring volume setting. However, a different message volume
can be set if required. For more information, refer to the Mitel 5634 VoWi-Fi Handset Configuration
Guide.
Turn the Vibrating Alert On or Off
If the vibrating alert is enabled, it vibrates on incoming calls and messages or when receiving a
message during a call. For more information, refer to the Mitel 5634 VoWi-Fi Handset Configuration
Guide.
1.
In the Settings menu, select Sound & Alerts → Vibrating alert.
2.
Select On, On if silent, or Off.
Set the Key Sound
1.
In the Settings menu, select Sound & Alerts → Key sound. Choose between Silent, Click, or
Tone.
2.
Select key sound.
To listen to the key sound, press the Play Soft key.
Set the Battery Warning
When the battery is low, the warning indication can be set to different modes.
1.
In the Settings menu, select Sound & Alerts → Battery warning.
2.
Select Repeated sound, Sound once, or Sound off.
Set the Hearing Aid
1.
In the Settings menu, select Sound & Alerts → Hearing aid.
2.
Select On to enable it.
8.6.2
Automatic Keypad Lock Settings
If configured, it is possible to dial any of up to five predefined emergency numbers when
the keypad is locked. Other examples of exceptions that override the key lock is personal
alarm, shortcut call, mute ALS. For the details, refer to the Mitel 5634 VoWi-Fi Handset
Configuration Guide.
Enable the Automatic Key Lock
1.
In the Settings menu, select Locks.
2.
Select Automatic key lock.
3.
Choose between:
−
On to automatically lock the keypad if it is not used before the specified lock time expires.
−
On, except calls to automatically lock the keypad if it is not used before the specified lock
time expires. If the user is in a call when the lock time expires, the keypad remains unlocked
until the user has completed the call.
4.
Press Back to re-display the Locks menu.
5.
Select Auto lock time.
To Next Page
Loading...
