USER GUIDE
Mitel 5634 VoWi-Fi Handset
3.
Press Save.
8.6.10
Alarm Settings
It is recommended to configure a shortcut to this menu if it is frequently used, refer to the 8.4
Shortcuts, page 39.
Applicable to 5634 Alarm only.
Edit Alarm Data
Data can be added to all types of alarms at transmission Information. It is recommended to create a
shortcut for quick access to the Edit alarm data menu, refer to the 8.4 Shortcuts, page 39.
1.
In the Settings menu, select Alarm.
2.
Select Edit alarm data.
3.
Enter alarm data.
4.
Press Save.
8.6.11
Administrator Menu
The handset has a hidden menu for system administrators. Refer to the Mitel 5634 VoWi-Fi Handset
Configuration Guide.
8.7
Profiles
There are two types of profiles that can be configured for the handset:
•
User profiles, refer to the 8.7.1 User Profiles, page 46.
•
System profiles, refer to the 8.7.2 System Profiles, page 48
15
.
8.7.1
User Profiles
An own profile is configured directly on the handset in the Profiles menu and can be set up for incoming
calls, message alerts, message volume, vibrating alerts, key sound, and so on. This can be useful when
there are many users on the same handset who require different sound profiles. It can also be used for
temporarily settings, for example when incoming calls should be silent in a meeting. A user can then
switch to his or her own particular profile when using the handset.
If no profile is selected, the normal settings are used.
The settings in a user profile can be superseded if the corresponding settings are enabled in a
system profile . When the system profile is enabled, its settings are not displayed in the
handset menu. For the details, refer to the 8.7.2 System Profiles, page 48.
To open the Profiles menu , do the following:
1.
In Idle mode, press Menu or the middle navigation key.
2.
Select Profiles and press the middle navigation key or the Select soft key to enter.
To get the detailed information about the whole Profiles menu structure, refer to the Profiles, page 73.
15. Applicable to 5634 Services and 5634 Alarm only.
To Next Page
Loading...
