Mitel 5634 - Acoustic Location Signal

USER GUIDE
Mitel 5634 VoWi-Fi Handset
Alarm Operation
58016275 / October 2020
34
An approximate location of the handset is added to alarms sent from the handset. The handset sends
the current and previous AP location to indicate where the alarm was activated.
Alarm with Data
The data can be defined and stored manually by the user using the Edit alarm data function in the
Services menu (refer to the 8.6.10 Alarm Settings, page 46). The stored data is added to all types of
alarms at transmission.
6.5 Acoustic Location Signal
All types of alarm can be followed by an Acoustic Location Signal (ALS). The ALS is an acoustic signal
from the handset that sounds for a predefined period of time to make it possible to by ear locate the
person that has initiated the alarm.
The signal is silenced by pressing the Mute button on the handset.
The ALS is not triggered if automatic call after alarm is active. However, if a call, for example
an automatic call after alarm, is already established during ALS, ALS will be silenced during this
call.
The handset can be configured to request to enter a password to turn off the ALS.