USER GUIDE
Mitel 5634 VoWi-Fi Handset
8.6.4
Display Settings
This section describes how to configure or change the display setting on the handset.
Brightness
1.
In the Settings menu, select Display → Brightness.
2.
Select Normal or Power save.
3.
Press Back.
Screen Saver
The handset can be configured to display some or no information when it is not in use and when it is
placed in a charger.
1.
In the Settings menu, select Display → Screen saver.
2.
Choose one of the following:
−
Information to display battery status and identification information while the handset is not in use.
−
Black to have a black screen when the handset is not in use.
−
Black also in call to have a black screen when the handset is not in use and during the ongoing
call.
3.
Press Back.
When the handset with the screen saver set to Information is in a charger, the Owner ID is
displayed even if the handset is switched off. This simplifies identification when many handsets
are in a charging rack.
Rotate Display Text
The handset can be configured to show the contents of the display (except for the Soft key bar) upside
down at incoming calls and messages. This feature can be also configured using the
WinPDM/WSM3/CPDM3 DM. For the details, please refer to the Mitel 5634 VoWi-Fi Handset
Configuration Guide.
1.
In the Settings menu, select Display → Rotate display text.
2.
Select Normal or Inverted.
3.
Press Back.
Font Style
1.
In the Settings menu, select Display → Font style.
2.
Select Normal or Bold.
3.
Press Back.
8.6.5
Time and Date Settings
Time and date format changes in the handset appear directly, but changes in the system appear after
a maximum of 24 hours after a change in the system or by turning the handset off and on again.
Set Time & Date
1.
In the Settings menu, select Time & Date.
2.
In the opened menus, select:
− Time format if you want to change current time format. 24-hour and 12-hour time formats
are available.
To Next Page
Loading...
