USER GUIDE
Mitel 5634 VoWi-Fi Handset
5.6.2
Decline the Call with a Message Template
1.
When the call is received, press the End call key or the Decline soft key to decline the call.
2.
In response to the Reply with a message template? dialog window, press Yes. A list of
predefined messages is displayed in the Templates menu.
3.
Select a message and, if required, edit it.
4.
Press Send. The caller’s number is shown on the handset display.
5.
Press Send again. The Message sent confirmation appears and the message appears to show
that the message has bee sent.
5.7
Call from the Message
A user can make a call while reading the message to discuss it with the called party. The called party
may be one of the following:
•
The message sender, refer to the Call the Sender of the Message, page 28.
•
A number included in the message, refer to the Call the Number Included in the Message, page 28.
•
A different party, please refer to the Call a Different Party, page 28.
The user can enable the loudspeaker function during the call to make it easier to read the received text
message while talking to the called party. For the details, please refer to the 4.5.9 Turn the Loudspeaker
On or Off, page 17.
Call the Sender of the Message
In the opened message window, press the Call key or go into the More → Call sender and press
Select to make a call.
Call the Number Included in the Message
This option is only visible if the number used in the body text message consists of minimum
three digits.
1.
In the opened message window, press More → Call no. in text and press Select open the
list of numbers used in the message.
2.
Select the number from the list and press the Call key or the Call soft key to make a call.
Call a Different Party
1.
In the opened message window, press More → Call and press Select.
2.
Enter the number or press the Phonebook in the Soft key bar to select the contact from the list.
3.
Press the Call key or the Call soft key to make a call.
5.7.1
Navigate during the Call
When the call has been placed from the message, the user can either get back to that message or
open any other message without disconnecting from an ongoing call.
To open the message while in a call, do the following:
1.
In the ongoing call window, press More.
2.
In the pop-up menu, select Messaging → Inbox. The list of the received message is displayed.
To Next Page
Loading...
