Placing a Conference Call on Hold
Hold allows you to put individual participants on hold in a conference.
To put an individual caller on hold:
• Tap Hold on the conference avatar for the individual participant
When a conference participant is put on hold, the ring around the photo flashes red.
In a video call, video is blocked in both directions.
To retrieve the held call:
• Tap again to retrieve the call
The Hold button toggles between Hold and Retrieve.
To put the entire conference on hold:
• Tap for each participant
You cannot put the entire conference on hold with one single action.
See “Conference Call Avatar” on page 27 for more information.
To Next Page
Loading...
