Factory Reset
1. Press System Settings
2. Select Reset to Factory Default
You will be able to cancel out of the window or confirm that the UC360 will have all the settings
return to the factory defaults, including the password. The following items will be included.
• Default password
• Default network settings
• Default SIP settings
• Default volume
• Default screen brightness
• Debug logging default will be OFF
• Default screen saver timeout value
You will have the option to also reset the current software load back to the original factory load
that shipped with the unit.
WARNING: BACK UP THE CURRENT UC360 SETTINGS TO AN SD CARD
BEFORE RESETTING TO FACTORY DEFAULTS.
To Next Page
Loading...
