Mitsubishi Electric Evolution+ s-MEXT - [P11] Functions Menu

48
Version 38
2.5.3 [P11] Functions Menu
Accessible from: “Factory” group.
Mask of the terminal
Description
Par.N.
Functions
 
Access mask to “Functions” menu.
Functions
--------------- P11.01
Air flow control type:
Disabled
Air flow control type.
Disabled | Constant Range | Constant DeltaP | Read Only DeltaP | Read Only Rate].
Always disabled on PMESH units.
11.01
Functions
--------------- P11.36
Fans type:
EC 0-10V
--------------- P11.02
Amount of EC fans:
1
Parameter for setting the fan type.
[AC | EC 0-10V | EC ModBus EBM].
Parameter for setting the number of fans.
Visible only on units with EC fans.
11.36
11.02
Functions
--------------- P11.11
Fan special function
01 enable: N
Enable special function 01 of the fans.
11.11
Functions – Q.Restart
--------------- P11.37
Quick Restart function
enable: N
Parameter for enabling the Quick Restart function.
11.37
Functions – Q.Restart
--------------- P11.38
K value of the EC
fan: 0046
Constant K value of EC fans.
11.38