Mitsubishi Electric Evolution+ s-MEXT - [P27] Optional Menu

76
Version 38
2.5.18 [P27] Optional Menu
Accessible from: “Service” group.
Mask of the terminal
Description
Par.N.
Optional
 
Access mask to the “Optional” menu.
Optional
--------------- P27.02
Electric heater
enable: N
--------------- P27.03
Electric heater
type: ON-OFF
Enable the heating elements.
Heating elements type.
[ON/OFF].
27.02
27.03
Optional
--------------- P27.04
T+H return probe
(humidity sensor): N
--------------- P27.05
Humidifier:
Disabled
Parameter for enabling the air return serial T/H probe.
Enable the humidifier and type.
[Disabled | Internal | External].
27.04
27.05
Optional
--------------- P27.06
Humid. Cylinder type:
1 kg/h Reduct 200V
1-ph Drain Pump
Confirm change: Y
Type changed
Parameter for selecting the humidifier cylinder.
Confirmation of the selected cylinder.
VIsible only if the internal humidifier type is set.
27.06
Optional
--------------- P27.07
Max steam production:
100%
Maximum steam production.
Visible only when the internal type of humidifier is set.
27.07
Optional
--------------- P27.16
Humidifier Periodical
Drain funct. Enable: N
--------------- P27.17
Delay between each
Periodical Drain: 024h
Enable the periodic discharge function during operation of the humidifier.
Hours of continuous operation between each instance of periodic discharge.
Visible only when the internal type of humidifier is set.
27.16
27.17
Optional
--------------- P27.18
Humidifier Inactivity
Drain funct. Enable: N
--------------- P27.19
Inactivity duration
before Drain: 03d
Enable the humidifier inactive discharge function.
Days of inactivity of the humidifier before discharge.
Visible only when the internal type of humidifier is set.
27.18
27.19
Optional
--------------- P27.09
Dehumidification
enable :
N
Dehumidifier configuration (N:disabled – Y:enabled).
27.09