Mitsubishi Electric Evolution+ s-MEXT - Page 75

75
Version 38
Mask of the terminal
Description
Par.N.
Manual
----------------------
Dehumidification
manual activation: N
----------------------
----------------------
Manual request for the activation of the dehumidification function.
Visible only if dehumidification management is enabled, if manual operation is
enabled and the unit is running.
Manual
----------------------
pLAN Standby Funct.
Force recheck: N
Force rotation: N
OK, rotation forced
Wait 00010sec before
forcing the rot. Again
Manual request to rotate units in Stand-by in LAN.
Visible only on Priority units if LAN is enabled.
Manual – Work Hours
Manual Set
000000h
Reset:N
-----------------------
Reset times of operation of the fans in the various configurations of the unit and
manual setting of the times.
Manual – Work Hours
Manual Set
000000h
Reset:N
000000h
Reset:N
000000h
Reset:N
Reset times of operation of the heaters and humidifier and manual setting of the
times.
Manual – N° of Starts
Manual Set
0000000
Reset:N
----------------------
----------------------
Reset of the number of unit starts and manual setting of the numbers.
Manual – N° of Starts
Manual Set
0000000
Reset:N
0000000
Reset:N
0000000
Reset:N
Reset number of heater and humidifier starts and manual setting of the numbers.
Manual
Energy Analyzer 1
Energy: 0000000kWh
Time: 0000000h
Reset counters: Y
Displays the energy meter and timer of the network analyser.
Reset the energy meter and timer of the network analyser.
Manual
Energy Analyzer 2
Energy: 0000000kWh
Time: 0000000h
Reset counters: Y
Displays and possible reset of the energy meter and timer of the network analyser
2