8
SYMBOLS
A number of symbols are used to highlight some parts of the text that are of particular importance. These are described below.
WARNING:
Information on the occurrence of situations/operations which, if ignored or not duly acted upon,
could put not only the Unit but also the functions of the Software and the various electronic parts at
risk.
OBLIGATION:
Indicates the need to take appropriate precautions/perform specific operations to avoid compromising
protection of the points of access reserved for authorised operators and/or operators who guarantee
the proper operation of the Unit.
INFORMATION:
Indicates technical information of particular importance which should not be neglected.
NOTICE:
This is used to address practices not connected with possible physical injury.
To Next Page