Mitsubishi Electric EZMOTION MR-E Super MR-E-70A-QW003 - Page 232

14 - 15
14. SERVO MOTOR
1) Plug 2) Cable clamp Cable 1) Plug 2)Cable clamp Cable
1) Plug (DDK) 2) Cable Clamp (DDK)
Connector
configuration
Application
Type Model name
Cable OD
[mm]
(Reference)
Model name
Servo motor power
supply connector
8.5 to 11 CE3057-10A-2-D
Straight
CE05-6A18-10SD-D-BSS
Applicable wire size: AWG14 to 12
10.5 to 14.1 CE3057-10A-1-D
8.5 to 11 CE3057-10A-2-D
IP65/IP67
EN Standard
compliant
Angle
CE05-8A18-10SD-D-BAS
Applicable wire size: AWG14 to 12
10.5 to 14.1 CE3057-10A-1-D
Straight
D/MS3106B18-10S
Applicable wire size: AWG14 to 12
14.3
(Bushing ID)
D/MS3057-10A
F
General
environment
(Note)
Angle
D/MS3108B18-10S
Applicable wire size: AWG14 to 12
14.3
(Bushing ID)
D/MS3057-10A
D/MS3102A18-10P
Note. Not compliant with the EN Standard.
Straight plug
Plug (DDK)
Connector
configuration
Application
Type Straight plug Socket contact Contact shape
Cable OD
[mm]
(Reference)
Servo motor
brake
connector
CM10-SP2S-S CM10-#22SC(S2)-100 4.0 to 6.0
CM10-SP2S-M CM10-#22SC(S2)-100 6.0 to 9.0
CM10-SP2S-L CM10-#22SC(S2)-100
Soldering type
Applicable wire size:
AWG16 or less
9.0 to 11.6
CM10-SP2S-S CM10-#22SC(C3)-100 4.0 to 6.0
CM10-SP2S-M CM10-#22SC(C3)-100 6.0 to 9.0
G
IP65
IP67
Straight
CM10-SP2S-L CM10-#22SC(C3)-100
Crimping type
Applicable wire size:
AWG20 to 16
Connection tool
(357J-50448) is
necessary.
9.0 to 11.6
CM10-R2P
www.DataSheet4U.com