14 - 2
14. SERVO MOTOR
14.2 Introduction
14.2.1 Features of servo motor
The following table indicates the main features of the servo motor. The items marked
are supported as
standard. For detailed specifications, refer to the chapter of the servo motor series.
Servo motor series
Item
HF-KE
W1-S100 HF-SE JW1-S100
Feature Low inertia Small capacity Medium inertia/medium capacity
2000r/min
Rated speed
3000r/min
Encoder resolution [pulse/rev] 131072 131072
Rated output [kW] 0.1 to 0.75 0.5 to 2.0
One-phase 230VAC (Note 4) Power supply voltage of
compatible servo amplifier
(Note 1)
Three-phase 200VAC
to 230VAC
Electromagnetic brake (Note 2) (Note 2)
Special shaft (Note 3) (Note 3)
EN Standard Compliance with overseas
standards
UL/C-UL Standard
Protection type IP55 (Note 4, 5) IP65
Note 1. Some power supply voltages may not be usable depending on the servo amplifier capacity.
For the power supply voltage range, refer to section 1.3.
2. Compatible products are available. For details, refer to section 14.6.3 and 14.7.3.
3. Compatible products are available. For details, refer to section 14.6.4 and 14.7.4.
4. Except for the shaft-through portion.
5. Only HF-SE52JW1-S100 corresponds.
14.2.2 Rating plate
OUTPUT 100W IEC60034-1 '03
HF-KE13W1-S100
AC SERVO MOTOR
INPUT 3AC 96V 0.8A
3000r/min IP55CI.B 0.5kg
SER.No. H14425001 034
Model
Input power
Rated output
Rated speed, Protection structure,
Insulation class, Mass
Serial number
To Next Page
Loading...
