Mitsubishi Electric EZMOTION MR-E Super MR-E-70A-QW003 - Servo System with Auxiliary Equipment

1 - 9
1. FUNCTIONS AND CONFIGURATION
1.8 Servo system with auxiliary equipment
WARNING
To prevent an electric shock, always connect the protective earth (PE) terminal
(terminal marked
) of the servo amplifier to the protective earth (PE) of the control
box.
(1) MR-E-100A-QW003 or less
Personal
computer
MR Configurator
(Servo configuration software)
Regenerative option
Command device
CN3
SET
CN1
CN2
CNP2
CNP1
L3 L1DCP WVU
MITSUBISHI
MR-E-
C
P
L
3
L2
L1
To CN3
To CN1
Servo amplifier
L2
To CN2
To CNP2
(Note)
Power supply
Options and auxiliary equipment
Circuit breaker
Magnetic contactor
MR Configurator
(Servo configuration software)
Reference
Section 13.2.2
Section 13.2.2
Section 13.1.4
Options and auxiliary equipment
Regenerative option
Cables
Power factor improving reactor
Reference
Section 13.1.1
Section 13.2.1
Section 13.2.3
Circuit breaker
(NFB) or fuse
Power
factor
improving
reactor
(FR-BAL)
Magnetic
contactor
(MC)
Protective earth
MODE
CHARGE
Servo motor
Note. A 1-phase 230VAC power supply may be used with the servo amplifier of MR-E-70A-QW003 or less. Connect the power supply to L
1
and L
2
terminals and leave L
3
open. Refer to section 1.3 for the power supply specification.
www.DataSheet4U.com