Mitsubishi Electric MELFA CR800-D Series - Error List

3 MELFA Smart Plus card
Error list 3-13
3.4 Error list
<The meaning of the error>
□００００＊
・
An error marked with a ＊ reset by turning the power OFF and
ON. Take the measures given.
・
The error type is indicated with a 4-digit number.
・
Three types of error classes are inidcated.
Ｈ ： High level error.............The servo turns OFF.
Ｌ ： Low level error .............The operation will stop.
Ｃ ： Warning .......................The operation will continue.
Table 3-6 MELFA Smart Plus card related error list
Error number
Error cause and measures
L.3780
Error message Cannot use the MELFA Smart Plus.
Cause Invalid MELFA Smart Plus.
Measures Check the MELFA Smart Plus card or parameter.
L.3781
Error message Cannot use the MELFA Smart Plus.
Cause Invalid MELFA Smart Plus.
Measures Check the MELFA Smart Plus card or parameter.
L.3782
Error message There're MELFA Smart Plus Cards.
Cause Multiple MELFA Smart Plus cards are installed.
Measures
Turn off controller and pull unnecessary MELFA Smart Plus
card.