7 Appendix
Display of option card information 7-135
7.Appendix
7.1 Display of option card information
You can display the option card information in RT ToolBox3 option. When you click “Online”->”Board”->"Slotn
(n = 1 to 2): MELFA Smart Plus" of the tree on the workspace in online state, you can read MELFA Smart Plus
card information in the property window.
* Option card information in property window is not updated automatically. If you want to update,
change it to offline once and change it to online, then perform the above operation again.
Figure 7-1 Example of display of option card information in RT ToolBox3
To Next Page
Loading...
