*Introduction
Thank you for purchasing this MELFA Mitsubishi Electric industrial robot.
This instruction manual describes the explanation of the MELFA Smart Plus card/card pack option.
Be sure to read this manual before using it and ask MELFA Smart Plus card/card pack to use it after fully
understanding the contents.
Although we strive to describe special handling as much as possible in this book, please interpret the items
not described in this document as "can not".
This manual is described on the premise that basic operations and functions of Mitsubishi Electric Industrial
Robots are understood. For basic operation, please refer to the separate manual "Detailed explanation of
functions and operation".
Notation method in this document
This indicates an item for which incorrect handling could present imminent
danger of death or serious injury.
This indicates an item for which incorrect handling could present a danger of
death or serious injury.
This indicates an item for which incorrect handling could present a danger of
injury. It could also present a danger of just physical damage.
・
No part of this manual may be reproduced by any means or in any form, without prior consent from
Mitsubishi.
・ The details of this manual are subject to change without notice.
・ The specification value is based on our standard test method.
・ An effort has been made to make full descriptions in this manual. However, if any discrepancies or
unclear points are found, please contact your dealer.
・ This is the original document.
・ Company names and product names described in this document are trademarks or registered
trademarks of each company.
・
and TM are omitted in the text of this guide.
Copyright(C) 2017-2021 MITSUBISHI ELECTRIC CORPORATION ALL RIGHTS RESERVED
To Next Page
Loading...
