APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
973
A
■Trigger
The following window specifies the trigger condition when the trigger logging is selected ( Page 179 Trigger Condition)
*1 This item is displayed when "Device" is specified as "Logging target" in the "Logging type" window.
*2 This item is displayed when "Label" is specified as "Logging target" in the "Logging type" window.
*3 The default of "Device change specification" or "Label change specification" when "Condition specification" is selected is shown.
Item Description Setting range Default
Condition
specification
Device change
specification
*1
Configure the trigger condition based on the device data
condition.
Page 179 Device/label change
specification
Checked
*3
Label change
specification
*2
Configure the trigger condition based on the label data
condition.
Not checked
*3
Step No.
specification
Configure the trigger condition based on the step No. Page 177 Step No. specification
When trigger instruction executed Trigger condition is established when the LOGTRG
instruction is executed.
To Next Page
Loading...
