Mitsubishi Electric MELSEC iQ-R-R00CPU - Page 987

APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
985
A
■Reading the logging setting
The following procedure reads the data logging setting from the target memory.
Operating procedure
1. Open the "Read Logging Setting" window.
[Online]  [Read Logging Setting]
2. Select the memory where the data to be read is stored from the "Target Memory" list.
3. Select the checkbox corresponding to the data item to be read in the "Target logging setting data" list, and click the
[Read] button.
Window
Displayed items
Any existing data (data logging setting with the same setting number or common setting) on the target is
overwritten.
Item Description
Target Memory Select the memory where the data to be read is stored.
Target logging setting data Select the data item to be read.