APPX
Appendix 13 How to Use CPU Module Logging Configuration Tool
971
A
■Pasting/Inserting a device or label copied in another application
A device/label which is copied in another application (such as Watch window of GX Works3 or GX Works2, a spreadsheet, or
a text editor) can be pasted to any line in the setting window of "Data".
*1
*1 CPU Module Logging Configuration Tool with version "1.70Y" or later supports this function. When pasting/inserting a local device or
label, use CPU Module Logging Configuration Tool with version "1.82L" or later.
1. On the setting window of "Data", select a line where copied data is to be pasted and select the item in the right-click
menu.
The keyboard shortcut for "Paste device/label copied in other application software" is "++". Note
that this keyboard shortcut is valid only when the "Head" column under "Device" or "Label" column is selected.
The following table summarizes the operation details of the functions.
*1 From the start to the newline or the first tab of strings in each line on the clipboard are pasted or inserted.
*2 If a copied string is invalid as a device/label, it cannot be pasted or inserted.
Item Operation
Paste device/label copied in other application software Pastes a device/label which is copied in another application into a line selected. (Existing data in
the line are overwritten and erased.)
*1*2
For devices, settings other than start devices are entered as default settings corresponding to each
device.
Insert device/label copied in other application software Pastes a device/label which is copied in another application into a line selected and shifts down
existing data in the selected line and below.
*1*2
For devices, settings other than start devices are entered as default settings corresponding to each
device.
To Next Page
Loading...
