610
36 ERROR CODES
36.4 List of Error Codes
4121H File related error • The specified drive (memory) or file does not
exist.
• Execute again after checking the specified drive (memory) or
file.
4122H File related error • The specified drive (memory) or file does not
exist.
• Execute again after checking the specified drive (memory) or
file.
4123H File related error • The specified drive (memory) is abnormal.
■When CPU Module Logging Configuration Tool is
used
• The data logging was started to the memory
having an error.
• Initialize the memory, and restore the drive (memory) to its
normal state.
4124H File related error • The specified drive (memory) is abnormal. • Initialize the memory, and restore the drive (memory) to its
normal state.
4125H File related error • The specified drive (memory) or file is performing
processing.
• Execute again after a while.
4126H File related error • The specified drive (memory) or file is performing
processing.
• Execute again after a while.
4127H File related error • File password mismatch • Execute again after checking the file password.
4128H File related error • File password mismatch with copy destination • Execute again after checking the file password.
4129H File related error • The request cannot be executed since the
specified drive (memory) is ROM.
• Execute again after changing the target drive (memory).
412AH File related error • The request cannot be executed since the
specified drive (memory) is ROM.
• Execute again after changing the target drive (memory).
412BH File related error • The specified drive (memory) is write-inhibited. • Execute again after changing the write inhibit condition or
drive (memory).
412CH File related error • The specified drive (memory) is write-inhibited. • Execute again after changing the write inhibit condition or
drive (memory).
412DH File related error • The specified drive (memory) does not have
enough free space.
• Execute again after increasing the free space of the drive
(memory).
412EH File related error • The specified drive (memory) does not have
enough free space.
• Execute again after increasing the free space of the drive
(memory).
412FH File related error • The drive (memory) capacity differs between the
drive (memory) copy destination and copy
source.
• Execute again after checking the drive (memory) copy
destination and copy source.
4130H File related error • The drive (memory) type differs between the
drive (memory) copy destination and copy
source.
• Execute again after checking the drive (memory) copy
destination and copy source.
4131H File related error • The file name of the file copy destination is the
same as that of the copy source.
• Execute again after checking the file names.
4132H File related error • The specified number of files does not exist. • Execute again after checking the specified data.
4133H File related error • The specified drive (memory) has no free space. • Execute again after increasing the free space of the drive
(memory).
4134H File related error • The attribute specification data of the file is
wrong.
• Execute again after checking the specified data.
4135H File related error • The date/time data of the engineering tool
(personal computer) is out of range.
• Execute again after checking the clock setting of the
engineering tool (personal computer).
4136H File related error • The specified file already exists. • Execute again after checking the specified file name.
4137H File related error • The specified file is read-only. • Execute again after changing the condition of the specified
file.
4138H File related error • Simultaneously accessible files exceeded the
maximum.
• Execute again after decreasing file operations.
4139H File related error • The size of the specified file has exceeded that of
the existing file.
• Execute again after checking the size of the specified file.
413AH File related error • The specified file has exceeded the already
existing file size.
• Execute again after checking the size of the specified file.
413BH File related error • The same file was simultaneously accessed from
different engineering tools.
■When CPU Module Logging Configuration Tool is
used
• An operation was performed to a file being
accessed.
• Execute again after a while.
413CH File related error • The specified file is write-inhibited. • Execute again after changing the file condition.
Error
code
Error name Error details and cause Action
To Next Page
Loading...
