EasyManua.ls Logo

Mitsubishi Electric MELSEC iQ-R - Page 106

Mitsubishi Electric MELSEC iQ-R
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
104
1 FUNCTIONS
1.1 BACnet Object Function
5. Set the following items.
6. Click the [Update] button.
How to specify a BACnetAddress
Operating procedure
1. Enter the number of the octets of a value to "OctetCount".
For IPv4, enter '6'.
For IPv6, enter '18'.
2. Enter an IP address in order from the top in the textbox of "OctetData".
3. Enter the port number
*1
(BAC0 in hexadecimal) of a BACnet module in the remaining two text boxes of "OctetData". For
decimal, enter '186' and '192'.
In "OctetData", hexadecimal numbers can be set by adding 'h' at the end of an address.
*1 Note that the port number of a BACnet module to be specified to BACnetAddress and PortNo in [Settings] [Network Information] are
different.
Item of
RecipientList
Description
Recipient Specify the send target of Event notifications with a DeviceID or a BACnetAddress.
When specifying a send target with DeviceID, enter the instance number of a send target device in the rightmost textbox.
When specifying a send target with BACnetAddress, select "BACnetAddress" from the leftmost pull-down list, and specify the send
target device by referring to the following section.
Page 104 How to specify a BACnetAddress
ValidDays Select the days of the week to enable sending Event notifications.
FromTime Specify a starting time to enable sending Event notifications.
ToTime Specify an ending time to send Event notifications.
ProcessID Specify the ProcessID that is included in Event notifications.
IssueConfirmed False Send an UnconfirmedEventNotification that expects no reply from the send target.
True Send a ConfirmedEventNotification that expects reply from the send target.
Transitions ToOffnormal Select this to send an Event notification when an EventState is changed to Offnormal.
ToFault Select this to send an Event notification when an EventState is changed to Fault.
ToNormal Select this to send an Event notification when an EventState is changed to Normal.
Decimal/
Hexadecimal
IP address Port number of BACnet module
*1
Decimal 192 168 0 255 186 192
Hexadecimal C0h A8h 0h FFh BAh C0h

Table of Contents

Related product manuals