Mitsubishi Electric MELSEC iQ-R - Page 161

1 FUNCTIONS
1.9 Calendar Interaction Function
159
1
3. There are three specification methods
*1
to specify a copy source BACnet device (central monitoring device). Set the
items required for each method, and click the [Add] button.
 How to specify both Calendar InstanceNo of itself and Calendar InstanceNo
*2
 How to specify an ObjectName
*3
 How to specify a Calendar InstanceNo
*3
*1 For the method to specify multiple copy source BACnet devices in a batch, refer to the following section.
Page 216 Specifying objects using a CSV file
*2 When joining BACnet, a ReadProperty(Multiple) service is automatically sent.
*3 When joining BACnet, a Who-Has service is sent and an I-Have service is received automatically. After the transmission is completed, a
ReadProperty(Multiple) service is automatically sent. If the I-Have service is not received, calendar information will not be copied.
4. When using the specification method of  or , the copy source BACnet device (central monitoring device) should be
recognized as a communication target when joining BACnet.
Set the instance number of the copy source BACnet device (central monitoring device) to the Restart_Notification_Recipients
property of a Device object.
For the setting method of the Restart_Notification_Recipients property of a Device object, refer to the following section.
Page 179 At the joining/leaving of BACnet
5. After joining BACnet, select [Calendar Interaction] to check the copy result of the calendar information.
Item Description
Calendar InstanceNo This item is required for , , and .
Specify the instance number of the Calendar object in a copy destination BACnet module.
Device InstanceNo This item is required for .
Specify the instance number of a device (central monitoring device) which includes a copy source Calendar object.
Calendar InstanceNo This item is required for  and .
Specify the instance number of a copy source Calendar object.
Object Name This item is required for .
CharacterCode Specify the character code which is used for "Object Name" in a copy source.
CodePage Specify the code page which is used for "Object Name" in a copy source.
Data Specify the object name of a copy source Calendar object.