Mitsubishi Electric MELSEC iQ-R - Page 183

1 FUNCTIONS
1.12 Configuration Function
181
1
When a power factor property is changed to True, the upper/lower limit determination condition is changed for power factor.
Note that, a PresentValue property value is not automatically changed to the power factor value. Set the value which is
changed to the power factor value with the program to a PresentValue property.
• -100 < LowLimit < -50, 50 < HighLimit < 100
• 50 < HighLimit < LowLimit < 100
N: 100% value
(1) Upper limit error
(2) Lower limit error
N: 100% value
(1) Upper limit error
(2) Lower limit error
0
(1)
(2)
0
PresentValue PresentValue
N2N
-50
-100
50
HighLimit
LowLimit
100
0
(1)
(2)
(2)
0
PresentValue PresentValue
N2N
-50
-100
50
HighLimit
LowLimit
100