ENGINE – Specifications
11-8
Items Nm
Front case and oil pan
Drain plug 39
Oil pan 7
Oil screen 19
Buffle plate 22
Oil pressure switch 10
Oil cooler by-pass valve 54
Relief plug 44
Plug 24
Front case 24
Oil pump cover (Screw) 10
Oil pump cover (Bolt) 16
Piston and connecting rods
Connecting rod nut 20 + 90° to 94°
Crankshaft and flywheel
Flywheel bolt 132
Rear plate 11
Bell housing cover 9
Oil seal case 11
Beam bearing cap bolt 25 + 90°
Check valve 32
Throttle body
Throttle position sensor 3.5
Idle speed control body assembly 3.5
Turbocharger
Waste gate actuator 11
To Next Page
Loading...
