8 - 6 8 - 6
MELSEC-Q
8 ONLINE MODULE CHANGE
(3) Mounting of new module
(a) Mount a new module to the same slot and connect the external wiring.
(b) After mounting the module, click the [Execution] button and make sure that
the "RUN" LED is lit. Module READY (X0) remains OFF.
(4) Operation check
(a) When making an operation check, click the [Cancel] button to cancel
control resumption.
(b) Click the [OK] button to leave the "Online module change" mode.
To Next Page
Loading...