7 - 1 7 - 1
MELSEC-Q
7 PROGRAMMING
CHAPTER 7 PROGRAMMING
This chapter describes a sequence program for use of the QD60P8-G.
Using the utility package (GX Configurator-CT), the QD60P8-G can operate the
system without using a sequence program. Refer to Chapter 6 for details of how to
operate the utility package (GX Configurator-CT).
When diverting the program example introduced in this chapter to the actual system,
fully check that there are no problems in the controllability of the system.
7
To Next Page
Loading...