[To change the operation conditions]
1
Tap the Menu button on the TOP screen and select Useful functions ⇒ Home leave ⇒
Details .
2
The Details setting menu is displayed. The following items can be
set.
①
Determine temp rule in cooling: Set the outdoor temperature to
judge the operation mode in cooling.
Allowable setting range: 26
°
C to 35
°
C (at 3
°
C intervals)
Factory settings: 35
°
C (☞3)
②
Determine temp rule in heating: Set the outdoor temperature to
judge the operation mode in heating.
Allowable setting range: 0
°
C to 15
°
C (at 3
°
C intervals)
Factory settings: 0
°
C (☞
4
)
③ Set temp rule in cooling: Set the indoor temperature to start
operation in cooling.
Allowable setting range: 26
°
C to 33
°
C (at 1
°
C intervals)
Factory settings: 33
°
C (☞
5
)
④
Set temp rule in heating: Set the indoor temperature to start
operation in heating.
Allowable setting range: 10
°
C to 18
°
C (at 1
°
C intervals)
Factory settings: 10
°
C (☞
6
)
⑤ Fan speed rule in cooling: Set the fan speed in cooling mode.
Factory settings: Low (☞
7
)
⑥ Fan speed rule in heating: Set the fan speed in heating mode.
Factory settings: Low (☞
8
)
■Items set at the details setting menu are effective for the operation at the next
home leave mode.
Home leave mode
Fan speed rule in heating
Previous Back
Select the item.
Home leave mode
Determine temp rule in cooling
Determine temp rule in heating
Set temp rule in cooling
Set temp rule in heating
Fan speed rule in cooling
Next Back
Select the item.
Determine temp rule in cooling
Back
Tap
▲▼
to set offset value.
Set
3
Set the outdoor temperature for the “Determine temp rule in cooling”.
Select a desired setting temperature (26°C to 35°C, at 3°C intervals).
with the
▲
▼
buttons.
Tap the
Set
button after the setting.
To Next Page
Loading...
Need help?
General
