3
When the letter selection screen is displayed same as at the setting
of the name of R/C (
☞
58), enter letters.
The name of IU can be entered up to 4 2-byte (8 1-byte) letters.
When the input is over, tap the
Set
button. The text “The
registration is completed.” is displayed, and the settings are
completed.
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Administrator settings
⇒
R/C display setting
⇒
Indoor temp display
.
2
The Indoor temp display screen is displayed.
On the Indoor temp display screen, select ON/OFF of the display.
When R/C sensor setting is enabled, the room temperature (R/C) is
displayed (refer to the installation manual on how to make these
settings).
OFF … Room temperature is not displayed on the TOP screen.
ON … Room temperature is displayed on the TOP screen.
③ Indoor temp. display
Select ON/OFF for the room temperature display.
Menu
Direction
Auto
16：00
(Mon)
F1: High power F2: Energy-saving
Timer
Now stopping.
Set temp
MEETING1
Room
Indoor temp display
OFF
Back
Select the item.
ON
Name of IU
カナ
Back
Input the name & tap [Set].
Set
NextDelete
AlphabetNumber
漢字
汉字
When R/C sensor setting is disabled, the room temperature
○
°C is
displayed.
To Next Page
Loading...
