－ 72 －
■
“OU silent operation by external input” display
Menu
Direction
Auto
16：00
(Mon)
F1: High power F2: Energy-saving
Timer
OU silent operation by external input
Set temp
MEETING1
Room
To notify any maintenance information related to the product, the
message “There is a information of maintenance. Check the content
from [Menu].” may be displayed in the message display.
When this message is displayed, tap the
Menu
button. The
maintenance description will be displayed.
Contact the dealer/company shown as the Contact company (
☞
page
68) and notify the details (code) of required maintenance.
■
“There is a information of maintenance. Check the content from [Menu].” display
Menu
Direction
Heating
20：20 (Tue)
F1: High power F2: Energy-saving
Timer
There is a information of maintenance.
Check the content from [Menu].
Set temp
When the “Back-up” is displayed, contact dealer/company shown as the
Contact company (
☞
page 68) immediately for checking.
■If the operation is continued without checking, it could result in breakdown.
■
“
Back-up
”
display
When any error occurs on the OU but its operation is continued as an emergency measure, the message of
“
Back-up
”
will be displayed.
Menu
Direction
Cooling
16：41
(Mon)
F1: High power F2: Energy-saving
Timer
Back-up
Set temp
MEETING1
When “OU silent operation by external input” is displayed, the operation
performed will be the same as the silent mode control (
☞
page 64)
performed from the R/C.
During silent mode control, operation with maximum capacity is not
allowed.
The message “OU silent operation by external input” will be displayed when silent mode control is operated through a
central control device (not included) or an IO external input (not included).
To Next Page
Loading...
