Diagnostics and Errors 8-5
Error Description
Code
046 Line type must be S (segment) or V (vector).
051 Imaging mode in the graphic header must be 0.
052 Data type in the RFID Data Field is invalid. See “Defining the RFID Data Field” in
Chapter 3 for more information.
Batch Errors
Error Description
Code
101 The format referenced by batch is not in memory.
102 Print quantity is outside the range 0 to 32000.
104 Batch mode must be N (new) or U (update).
105 Batch separator in a batch control field must be 0 (Off) or 1 (On).
106 Print multiple is outside the range 1 to 999.
107 Cut multiple is outside the range 0 to 999. Only valid for printers with a knife.
108 Multiple part supply is outside the range 1 to 5.
109 Cut type is outside the range 0 to 5.
110 Image rotation must be 0 (no rotation) or 1 (180° rotation) in the batch control field.
Option Errors
Error Description
Code
200 Option number must be 1- 7, 20, 21, 30, 31, 42, 50, 51, 52, 53, 60, 61, or 64.
201 Copy length is outside the range 0 to 2710.
202 Copy start position must be 1 to 2710.
203 Destination start position must be 1 to 2710.
204 Source field must be 0 to 999.
205 Copy type must be 1 (copy after rules) or 2 (copy before rules).
206 Increment/Decrement selection must be I (increment) or D (decrement).
207 Incrementing start position must be 0 to 2710.
208 Incrementing end position must be 0 to 2710.
209 The incrementing amount must be 0 to 999.
210 Security value for a PDF-417 bar code must be 0 to 8. Correct the value and resend the
format to the printer.
211 Narrow element value is less than 1 or greater than 99. Correct the value and resend
the format to the printer.
212 Wide element value is less than 1 or greater than 99. Correct the value and resend the
format to the printer.
213 Dimension must be 1 to 30 for a column or 3 to 90 for a row on a PDF417 bar code.
214 Truncation code must be S (standard) or T (truncated bar code).
215 Aspect code must be C (columns) or R (rows).
To Next Page
Loading...
