Monarch 9906 - Defining Box Fields

To Next Page

To Previous Page

Defining Fields 3-27

Defining Box Fields

Use boxes to form borders or highlight items of interest. Define each box field separately. This

field is not assigned a field number, but is counted as a field (keep this in mind, as the printer

allows a maximum of 1000 fields per format). You can define any line length and a thickness up

to 99 dots, as long as the solid black print does not exceed 30 percent of any given square inch

of the label.

Syntax Q,row,column,end row,end col,thickness,"pattern" |

Q1. Q Box (Quadrilateral) Field.

Q2. row Distance from bottom of print area to lower left

corner of box. 10 is the default.

English 0 – 1599

Metric 0 – 4061

203 Dots 0 – 3246

300 Dots 0 – 3597

Q3. column Distance from left edge of print area to lower left

corner of box. 10 is the default.

English 0 – 409

Metric 0 – 1040

203 Dots 0 – 830

300 Dots 0 – 1227

Q4. end row Distance from bottom of print area to upper right

corner of box. 100 is the default.