2-6 Packet Reference Manual
Defining the System Setup Packet
Use the system setup packet (A) to select the power up mode, display language, print separators
between batches, print a slashed zero, and select the symbol set.
Syntax {I,A,powup_mode,language,sep_on,slash_zero,symbol_set | }
A1. A System Setup Packet
A2. powup_mode Printer’s powerup mode. 0 is the default. Options:
0 online mode. Printer is ready to receive data and print.
1 offline mode. Operator can select a format and enter data to print.
A3. language Display Language. 0 is the default. Options
0 English 8 Spanish (MX)
1 French 9 Danish
2 German 10 Dutch
3 Spanish (ES) 11 Finnish
4 Japanese 12 Norwegian
5 Portuguese 13 Polish
6 Italian 14 Turkish
7 Swedish 15 Simplified Chinese
A4. sep_on Batch Separators. 0 is the default. Options:
0 Does not print a separator
1 Prints a separator
Note: Do not use batch separators with continuous (non-indexed) supply.
A5. slash_zero Slash Zero. 0 is the default. Options:
0 Print a standard zero
1 Print a zero with a slash through it
A6. symbol_set Symbol Set. 0 is the default. Options:
0 Internal
1 ANSI
2 Code Page 437 (Latin U.S.)
3 Code Page 850 (Latin 1)
4 Code Page 1250 (Latin 2)
5 Code Page 1251 (Cyrillic)
6 Code Page 1252 (Latin 1)
7 Code Page 1253 (Greek)
8 Code Page 1254 (Turkish)
9 Code Page 1255 (Hebrew)
10 Code Page 1256 (Arabic)
11 Code Page 1257 (Baltic)
12 Code Page 1258 (Vietnamese)
13 DOS Code Page 852 (Latin 2)
14 DOS Code Page 855 (Russian)
15 DOS Code Page 857 (IBM Turkish)
16 DOS Code Page 860 (Portuguese)
17 Wingdings
18 Macintosh
19 Unicode
20 BIG5
21 GB2312
22 SJIS to SJIS (CP 932, Japanese)
23 GB2312 to GB2312 (CP 936, Simplified Chinese)
24 BIG5 to BIG5 (CP 950, Traditional Chinese)
25 KSC5601
26 Unicode UTF-8
To Next Page
Loading...
