Monarch 9906 - Script Errors; Hard Printer Failure Errors

Diagnostics and Errors 8-15
Script Errors
These errors occur when there is a script (application) problem.
Error Description
Code
850 Invalid script packet or not enough flash memory for the script. The script download
failed. Format flash memory and download the script using the COPY command from the
command prompt.
851 Invalid lookup table or not enough flash memory for the script. The lookup table
download failed. Check the data in the lookup table. Format flash memory and
download the script using the COPY command from the command prompt.
852 Invalid buffer definition packet or not enough flash memory for the script. One or more
of the following buffers were invalid: input buffer, temporary buffer, lookup buffer,
printer, or array buffer. Check the buffer definitions. Format flash memory and
download the script using the COPY command from the command prompt.
853 Invalid version string or not enough flash memory for the script. The version information
in the APPVERSION command is missing or invalid. Make sure the information is
enclosed in double quotation marks. Format flash memory and download the script using
the COPY command from the command prompt.
854 Invalid table (string and numeric) data or not enough flash memory for the script. Check
the data. Format flash memory and download the script using the COPY command from
the command prompt.
855 Invalid start/clear command. The script is missing the start or clear command {S space}.
856 Invalid quit command. The script is missing the quit command {Q space}.
857 Illegal command in the script. Your script may include commands that have been
removed from the ADK2 scripting language.
858 Check sum error. Each packet has a four-digit checksum at the beginning of the packet.
Recompile the script.
859 Script download buffer overflow. The image buffer is used as the SCRATCH buffer.
Increase the size of the image buffer.
Hard Printer Failure Errors
Errors numbered 930-940 are errors that may occur during the loading of flash memory. Errors
numbered 950-999 may indicate a circuit board failure. These errors are hard printer failures.
Call Technical Support if you receive these messages.
Error Description
Code
900 RAM test failure.
901 ROM/EPROM checksum failure.
902 Software timer failure.
903 Software interrupt failure.
905 Illegal interrupt.
906 Non-maskable interrupt. Check format packet for font clear or format clear packets.
907 Low RAM error.
908 Non Volatile RAM checksum failure.