8-16 Packet Reference Manual
Error Description
Code
909 NVRAM reset.
910 Warm restart.
911 Version string mismatch.
930 Flash erase error.
931 Flash write error.
932 RAM write error.
933 Parity error.
934 Framing error.
935 Buffer overrun.
936 Invalid record type.
937 Invalid hex data.
938 Invalid checksum.
939 Invalid record count.
940 Invalid flash address.
Errors numbered 900-911 occur when you turn on the printer. They may indicate a circuit board
failure. Errors numbered 930-940 are errors that may occur during the loading of flash memory.
Errors numbered 950-999 indicate a circuit board failure. Call Technical Support if you receive
any of these messages.
When a HARD failure occurs on the printer, the printer displays WARNING or POWER DOWN on
the top line of the keypad display. If this happens, record the displayed message and turn off the
printer. If the problem reoccurs when you turn the printer on again, call Technical Support.
To Next Page
Loading...
