Defining Fields 3-23
C9. alignment Alignment of constant text in the field. L is the default. Options:
L Align on left side of field (default)
C Center text within field (monospaced fonts only)
R Align on right side of field (monospaced fonts only)
B Align at midpoint of field
E Align at endpoint of the field
Use L, B, or E for any font.
The red dot indicates the field origin and the line indicates the column
position for each field in the following graphic.
C10. char rot Character rotation. 0 is the default. The field or supply does not
rotate, only the characters do. Options:
0 Top of character points to top of field
1 Top of character points to left of field
2 Top of character points to bottom of field
3 Top of character points to right of field
C11. field rot Field rotation. 0 is the default. Field rotation rotates the whole field,
not just the characters. Rotation is affected by the pivot point, which
varies depending on how text is justified. Lower left corner of field is
the pivot point. Options:
0 Top of field points to top of supply
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply
C12. “fixed char” Fixed characters to appear in the field. “” is the default. Maximum
2710 characters. Enclose in quotation marks.
To Next Page
Loading...
