NICE5000 User Manual 2 Product Information
- 29 -
Item Specication
Basic
specications
Security check of
peripheral devices
after power-on
Security check of peripheral devices, such as grounding
and short circuit, after power-on
Status monitor
Monitoring the state of feedback signals to ensure that the
elevator works properly
I/O feature
Digital input (DI)
20 x DI
Input specication: 24 V, 5 mA
3 heavy-current detection input terminals of safety circuit
and door lock circuit
Input specication: 95−125 V
Analog input (AI) AI (voltage range: –10 V to +10 V)
Communication port
2 CANbus communication ports
1 Modbus communication port
Output terminal
block
6 relay outputs
The terminals can be allocated with different functions.
Encoder interface
Supporting different encoders by using an optional PG
card
Operation
and display
Keypad
3-digit LED display, implementing certain commissioning
functions
LED operation panel
5-digit LED display, querying/modifying most parameters
and monitoring the system state
Host computer
monitoring software
Connecting the control system and the host computer,
convenient for querying/motoring the system state.
Environment
Altitude Below 1000 m (de-rated 1% for each 100 m higher)
Ambient
temperature
–10°C to 40°C (de-rated if the ambient temperature is
above 40°C, maximum temperature: 50°C)
Humidity Maximum relative humidity 95%, non-condensing
Vibration Maximum vibration: 5.9 m/s2
Storage temperature –20°C to 60°C
IP level IP20
Pollution degree PD2
Power distribution
system
TN, TT
To Next Page
Loading...
Need help?
General
