Monarch NICE 5000 User Manual

2 Product Information NICE5000 User Manual
- 28 -
2.4 Technical Specications
Table 2-2 Technical specications of the NICE5000
Item Specication
Basic
specications
Maximum frequency 99 Hz
Carrier frequency
2–16 kHz, adjusted automatically based on the load
features
Motor control mode
•
Sensorless vector control (SVC)
•
Closed-loop vector control (CLVC)
•
Voltage/Frequency (V/F) control
Startup torque
0.5 Hz: 180% (SVC)
0 Hz: 200% (CLVC)
Speed adjustment
range
•
1:100 (SVC)
•
1:1000 (CLVC)
•
1:50 (V/F)
Speed stability
accuracy
•
±0.5% (SVC)
•
±0.05% (CLVC)
Torque control
accuracy
±5% (CLVC)
Overload
60s for 150% of the rated current, 1s for 200% of the rated
current
Motor auto-tuning With-load auto-tuning; no-load auto-tuning
Distance control
Direct travel ride mode in which the leveling position can
be adjusted exibly
Acceleration/
Deceleration curve
N curves generated automatically
Slow-down
New reliable slow-down function, automatically identifying
the position of the slow-down shelf
Shaft auto-tuning 32-bit data, recording the position in the shaft accurately
Leveling adjustment Flexible and easy leveling adjustment function
Startup torque
compensation
Load cell startup pre-torque compensation
No-load-cell startup pre-torque self-adaption
Real-time clock
Real-time clock for time-based oor service, peak service
and automatic password
Test function
Easy to implement multiple elevators commissioning
functions.
Fault protection Solutions to different levels of elevator faults
Intelligent
management
Remote monitoring, user management, and group control
adjustment

Monarch NICE 5000 Specifications

General

Brand	Monarch
Model	NICE 5000
Category	Controller
Language	English