Moog Infinity User Manual

Innity
®
Enteral Feeding Pump Operator’s Manual
8
2. DIRECTIONS FOR USE
Step 3:
Turn bag upside down
and gently squeeze.
Tilt bag as needed to
to evacuate air through
tubing port (Figure 2-4).
Step 4:
Gently pinch teal colored
tubing below “
” symbol.
Hold this position until air is
removed from tubing. Gently
squeeze bag at same time to
assist uid ow. If uid does
not ow, pinch pressure may
be too strong. (Figure 2-5).
NOTE: Inside the teal colored
tubing, below the “
” symbol
is the in-line occluder.
The in-line occluder is the
built-in anti free-ow valve.
By pinching tubing gently,
the tubing moves away
from the in-line occluder
allowing uid to ow
(Figure 2-6). It is important
to only pinch the tubing below the
“ ” symbol to avoid damaging the in-line occluder.
NOTE: Be extremely careful to pinch tubing using only the at, soft
part of your nger. Do not use ngernails when pinching tubing; doing
so may puncture the delivery set (Figure 2-7). If you suspect that the
delivery set has been punctured, please discard and use a new set.
NOTE: Air may also be removed from tubing using the pump’s priming
feature. See step 7 for instructions on using the priming feature.
Figure 2-4 Squeeze Bag Figure 2-5 Pinch Tubing
Figure 2-6 Tubing Segment
Being Pinched
Figure 2-7 Tubing Segment
Being Punctured by Fingernail

Moog Infinity Specifications

General

Model	Infinity
Type	Infusion Pump
Occlusion Pressure Settings	Low, Medium, High
Alarms	Occlusion, Low battery
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Manufacturer	Moog
Infusion Modes	Continuous, Intermittent
Display	LCD
Compatibility	Standard infusion sets